IP ADDRESS CONFIGURATION IN LINUX Fedora 11 AND 12


IP ADDRESS CONFIGURATION IN LINUX Fedora 11 AND 12

Okay, this time the administrator will explain about setting IP address in Linux fedora 11 and 12.

  • EXPLANATION IP ADDRESS
             Ip Address is an address of a host (computer) in a network, we are entering a network computer Dinama Local and Global We must have a name Ip address, Ip address is divided into two parts, namely the network address and host address, IPv4 _ (ip address versi4 ) consists of five classes, namely class A, B, C, D, E, class D is used for multicasting and class E for research.

Kelas Ip address
Ip Address
Netmask Default
Kelas A
1.0.0.0 – 127.0.0.0
255.0.0.0
Kelas B
128.0.0.0 – 191.255.0.0
255.255.0.0
Kelas C
192.0.0.0 – 223.255.255.0
255.255.255.0
Kelas D
224.0.0.0 – 239.255.255.255
-
Kelas E
240.0.0.0 – 254.0.0.0
-

Admin We will go straight to the topic. Go to> applications> system tools> terminal
Do not forget the original user uabh Position ($) to root (#)

[ root@ localhost aldye $ su
passwd
[ root@ localhost aldye #

You change it after the root, typed in the terminal setup
[ root@ localhost aldye # setup



Then the page will appear like this


                select> network configuration> device configuration> (remember! To move use the TAB was not wearing Kursos)
then fill in the IP address that you want for example to a Class C (If you want to use DHCP DHCP live mark to mark using SPACES).!


if completed OK> SAVE> SAVE $ QUIT, then restart the IP address (not just on his computer terminal typing service network restart / chkconfig on.

[ root@ localhost aldye # service network restart
Shutting down interface eth0:                                [  OK  ]
Shutting down interface eth1:                                [  OK  ]
Shutting down loopback interface:                       [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:                                    [  OK ]

If You're Ok means setting is successful, if FAILED means there is a failure, (the solution) into the system> preferences> Network Connection.


to check the IP address that we put on a typed Ipconfig on terminal.
[ root@ localhost aldye # ifconfig
eth0   Link encap:Ethernet  HWaddr 00:0E:2E:D8:D8:34 
          inet addr:200.10.100.2  Bcast:200.10.100.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:18 Base address:0x2000

NOT SATISFIED WITH THE RESULTS!


       When the ping (ip address Objectives) and the results, as shown below means you've managed to Solve the mystery of Ip address configuration in Linux fedora 11 and 12


[ root@ localhost aldye #  ping 200.10.100.2
64 bytes from 200.10.100.2: icmp_seq=1 ttl=64 time=0.066 ms
64 bytes from 200.10.100.2: icmp_seq=2 ttl=64 time=0.073 ms
64 bytes from 200.10.100.2: icmp_seq=3 ttl=64 time=0.067 ms
64 bytes from 200.10.100.2: icmp_seq=4 ttl=64 time=0.069 ms
64 bytes from 200.10.100.2: icmp_seq=5 ttl=64 time=0.072 ms


Trying congratulations!

2 komentar:

tyodongss said... Reply

keren gan postnya :D
pake english pula *jempol*

Unknown said... Reply

Thanks sob ...
sering" muncull yah ....
lebih baik kasih masukan ...

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | coupon codes